Introducing the differences between polypropylene high-strength filament and polyester filament.
Release time:
2024/05/28
Main Physical and Chemical Properties of High-Strength Polypropylene Filament
1. Morphology
Polypropylene fibers have a straight, smooth longitudinal surface and a circular cross-section.
2. Density
A major advantage of polypropylene fiber is its lightweight nature; with a density of only 0.91 g/cm³, it is one of the lightest among common synthetic fibers. Consequently, for a given weight, polypropylene can achieve a greater coverage area than other fibers.
3. Tensile strength
Polypropylene fiber boasts high strength, significant elongation, a relatively high initial modulus, and excellent elasticity. Consequently, it exhibits outstanding abrasion resistance. Moreover, its wet strength is essentially equal to its dry strength, making it an ideal material for manufacturing fishing nets and ropes.
4. Hygroscopicity and Dyeability
Polypropylene has very low hygroscopicity—practically no moisture absorption—and its moisture regain under normal atmospheric conditions is close to zero. However, it exhibits capillary action, allowing water vapor to be transported through the fabric’s capillaries without itself absorbing any moisture. Polypropylene also has poor dyeability and an incomplete color spectrum, but these limitations can be mitigated by using dope‑dyeing techniques.
5. Acid and alkali resistance
Polypropylene exhibits excellent chemical resistance; with the exception of concentrated nitric acid and concentrated sodium hydroxide, it demonstrates strong resistance to both acids and bases, making it well suited for use as a filtration material and packaging material.
6. Lightfastness, etc.
Polypropylene has poor lightfastness and thermal stability, is prone to aging, and cannot withstand ironing. However, it can be treated during the spinning process by adding an anti-…
What is polyester filament, and what are its properties?
Polyester is an important class of synthetic fibers and serves as the commercial name for polyester fiber in China. It is a fiber‑forming polymer—polyethylene terephthalate (PET)—produced from terephthalic acid (PTA) or dimethyl terephthalate (DMT) and ethylene glycol (EG) through esterification, ester exchange, and polycondensation reactions, and is subsequently spun into fibers after appropriate post‑processing.
Polyester filament has the following properties:
1. It exhibits high strength: the tenacity of staple fibers ranges from 2.6 to 5.7 cN/dtex, while that of high‑tenacity fibers is 5.6 to 8.0 cN/dtex. Due to its low hygroscopicity, its wet‑state strength is virtually identical to its dry‑state strength. Its impact resistance is four times greater than that of nylon and twenty times greater than that of viscose fiber.
2. Excellent elasticity, comparable to wool; it can almost fully recover when stretched by 5%–6%. Its resistance to wrinkling surpasses that of other fibers, ensuring the fabric remains wrinkle-free and maintains good dimensional stability. The elastic modulus ranges from 22 to 141 cN/dtex, 2–3 times higher than that of nylon.
3. Excellent heat resistance
4. Excellent water absorption
Based on the introduction above, can you now tell the difference between polyester filament and high‑strength polypropylene filament?
keywords
Related news
Contact Us
Address: Second Industrial Park, Qinlan Town, Tianchang City, Anhui Province
Phone:0550-7831885
Fax: 0550-7833886
Phone:13665275456
Email: dongyuliang@yzsanhe.com
Copyright:Tianchang Xincheng New Materials Technology Co., Ltd